Matte Paint Protection Film in City of Industry, CA

Matte paint protection film gives your car a non-glossy, factory matte look while still guarding the surface underneath from chips, scratches, and everyday road wear. At AeroWerkz in City of Industry, CA, we install matte film both on vehicles that already come from the factory with a matte finish and on glossy vehicles being converted to a matte look through a full body package.

Stek Logo
Profection Logo
GSWF Logo
A black square on a white background.
Technician inspecting the front of a black sports car in a garage
Hand polishing a white car hood near the headlight with a blue cloth
Black tilted rounded-rectangle icon on a white background

A DIFFERENT KIND OF FINISH

Matte Protection Without Losing The Look

A matte finish looks its best when the film is carefully prepared, applied, and maintained. Because dust, debris, streaking, and imperfections can be especially noticeable beneath a matte surface, our controlled shop environment gives our team the clean space needed to focus on a smooth, consistent application. We take the same careful approach to surface preparation and installation across every panel to help create an even finish that holds its appearance over time.

Transform or Protect Your Matte Finish

Whether your vehicle came from the factory with matte paint or you want to transform a glossy finish into a sleek matte appearance, the goal is the same: create a finish that looks intentional while helping protect the paint underneath. Matte film gives you the opportunity to change the character of your vehicle while adding a protective barrier designed to stand up to everyday driving.

Keep the Matte Look Looking Its Best

For additional protection and easier upkeep, matte film can be paired with a ceramic coating specifically suited for matte surfaces. This helps maintain the low-sheen appearance without introducing the unwanted gloss that traditional products can leave behind. If you're considering a glossy-to-matte conversion but aren't sure if it's right for your vehicle, our team can walk you through the process, appearance, and maintenance before you make a decision.

Black Lamborghini in a showroom with other sports cars on display under spotlights.
Two sports cars in a showroom, a silver Audi in front and a red car on a lift behind it.
Black Mercedes SUV in an indoor car showroom with bright lights and exposed ceiling pipes
Two luxury cars parked indoors: a white BMW sedan in front of a gray SUV.
GET A QUOTE FREE QUOTE

TRACK READY

Starting at $2,800

Track Package

  • Full hood
  • Mirrors
  • Full front fenders
  • Rocker panels
  • Headlights
  • Fog lights
CALL (310) 817-9912

  • THIS PACKAGE INCLUDES:

    • Level 1 paint correction
    • Double application of ceramic across paint and body panels
    • 3 years of CQUARTZ UK 3.0 plus an added layer of CQUARTZ SiC
    • Manufacturer backed warranty (ask your detailer for details)
Track Package - Porsche 911 GT3 RS

CHOOSE YOUR COVERAGE

Our Matte Paint Protection Film Package

FULL BODY PROTECTION

Matte/Satin PPF

Starting at $6,000

Our Matte/Satin PPF package covers your entire vehicle in a single application, whether it’s a factory matte car or a glossy vehicle being converted to a matte finish. Coverage includes every exterior panel, giving your car complete protection from chips, scratches, and road wear while maintaining a consistent, non glossy look from every angle.

Factory Finish Gloss High-shine reflection
PPF Finish Matte A bold, refined look with no reflections.
PPF Finish Satin A smooth, subtle sheen with reduced glare.
SatinMatteGloss
❮❯
Choose Your Finish
Full Body PPF - Audi RS5
Black tilted rounded rectangle on a white background
Black SUV in a workshop, doors open, with a person working inside and other cars in the background.

WHAT TO EXPECT

How A Matte Film Install Works

  • Surface Prep

    Before any film goes on, we clean and decontaminate every panel so nothing gets trapped underneath the finish. This step matters even more on matte film, since surface imperfections tend to show more clearly under a low sheen finish than they would under gloss.

  • Application

    Film is cut and hand applied across the entire vehicle, with careful attention paid to panel gaps, edges, and curves where a rushed install tends to show. Our controlled shop environment helps keep the finish consistent from panel to panel.

  • Curing And Care

    Once applied, matte film needs a short curing period before it can be safely washed. We'll walk you through the specific products and techniques that keep a matte finish looking right, since standard car wash soaps and waxes aren't always matte safe.

Keep Your Matte Finish Flawless

THE DETAILS THAT MAKE MATTE WORK

Why A Matte Finish Takes A Different Kind Of Care

A matte or satin finish lives or dies on the small stuff. Panel gaps, mirror caps, and trim pieces all need to be wrapped with the same attention as the hood or fenders, or the finish ends up looking inconsistent from one angle to the next. It's also a look a lot of our clients associate with performance and exotic builds rather than a daily driver, so we treat every conversion with that same level of intention, down to how the edges are tucked and finished. The goal isn't just a matte car. It's a matte car that looks like it was designed that way from the start.

A black square on a white background.
Person washing a black car with pink gloves, covered in soapy water
Black tilted rounded rectangle on a white background
Black BMW sedan parked in a garage, side rear view with red taillight and alloy wheel visible

CONSIDERING THE SWITCH

What To Think Through Before Going Matte

  • How Long You Plan to Keep the Vehicle

    Think about whether matte is a look you want to enjoy for a few years or for the long term. Your ownership plans can help determine whether a film conversion is the right fit.

  • Returning to Gloss in the Future

    One of the biggest advantages of matte film is its reversibility. Unlike repainting, the film can be removed if you decide you want to return to your vehicle’s original glossy finish later.

  • Your Vehicle’s Overall Style

    Consider how a matte finish will work with your existing wheels, trim, badges, and other exterior details. These elements can make a big difference in the overall finished look.

  • Not Sure Yet? Talk With Our Team

    You don’t have to make the decision on your own. Our team can walk you through the conversion process, what to expect, and whether matte film makes sense for your vehicle before you commit.

MORE WAYS TO PROTECT YOUR CAR

Pair Your Matte Film With Added Coverage

Matte paint protection film pairs well with a few of our other services if you're looking for complete coverage in one visit. A matte specific ceramic coating helps maintain that low sheen finish without adding unwanted gloss, while window tinting rounds out your car's protection against sun exposure and interior heat. If you're deciding between a matte and a glossy finish, our paint protection film page covers our standard clear coverage options as well.

A black square on a white background.
White sedan in a garage, wrapped around the front wheel and fender during bodywork repair
Black tilted rounded rectangle on a white background
Two gloved people wrapping a black car with clear protective film

COMMON QUESTIONS

Frequently Asked Questions

  • Can any car be converted from glossy to matte?

    Most vehicles are good candidates for a full body matte conversion, though our team will take a look at your car's specific paint and body lines before confirming coverage and timeline.

  • Does matte film need different care than a glossy finish?

    Matte film requires specific matte safe soaps and products, since standard car wash soap or wax can add unwanted shine or streaking to the finish over time.

  • How long does a full body matte film installation take?

    A full body install takes longer than a partial coverage package since every panel on the vehicle is being covered, and we'll give you a specific timeline based on your car once you book.

  • Will matte film protect my car the same way gloss film does?

    Matte and gloss film both guard against chips, scratches, and road wear in the same way. The only difference is the finish left behind once the film is applied.

  • Can I get a ceramic coating on top of matte paint protection film?

    We offer a ceramic coating designed specifically for matte surfaces, which helps maintain the low sheen look while adding an extra layer of easier upkeep.